Introduce yourself to the class by explaining briefly your background and interest in operations m...

...

Instructions Research peer-reviewed journals through the?SNHU Shapiro Library?that discuss qualit...

...

Search the internet for an appropriate instructive video that presents the basic concepts of lean ...

...

Instructions Submit your chosen trend in operations management along with the specific organizati...

...

Read the book chapter,?Sustainable Product Platforms: Using Nature's Rules to Design a Platform Th...

...

Use the?SNHU Shapiro Library?to locate peer-reviewed articles relating to sustainable operations m...

...

Read the following articles:?Lean and Green: The Move to Environmentally Friendly Manufacturing?an...

...

Instructions Submit the SWOT analysis, Section III, of the final project, including all critical ...

...

Read the article?Regional Clusters in a Global World: Production Relocation, Innovation, and Indus...

...

Instructions Submit a draft of Section IV of your final project covering the continuous improveme...

...

Considering this week's assigned readings, explain reverse logistics in your own words and provide...

...

Read this brief article, which lists the rules for success as outlined by Wal-Mart's founder, Sam ...

...

Stakeholders After completing the readings, imagine now that that you are employed by Panera (St....

...

Explain a personal experience that you had when receiving some kind of after-sale customer support...

...

Write a paper addressing the questions in sections I and II of the final project. Regarding sectio...

...

Describe an instance of green reverse logistics that you have personally observed or been a part o...

...

Submit a paper addressing the questions in section III of the final project, assessing reverse log...

...

Submit a paper addressing the questions in section IV of the final project, and analyze the produc...

...

Read the book chapter Global Supply Chain Management and offer your thoughts on global sup...

Global supply chain is the multi network that distributes goods and services across the world within multiple continents and countries. This is one ...

Complete the module reading?What is Supply Chain Management? and additionally research peer-review...

...

Reclaiming products from the end-user and returning them to the point where value can be retained ...

...

Complete the module reading?What's Your Excuse for Not Using JIT??and?Just-in-Time Production Cont...

...

Write the conclusion (Section VI) and submit the final business report with SWOT analysis. It should...

Natura & Co Business Report Introduction Trend: One of the trends in operation management that I have chosen for further study in my final pap...

Find an article on the internet published within the past 24 months that describes a new kind of t...

...

You will submit a reverse logistics model analysis. You will need to complete section V, and integra...

Organization Selection: Amazon Almost every customer prefers Amazon because it is a platform for diverse goods and services. Since the company has ...

In your post, consider ways that a company can address its need for outbound transportation and re...

...

This is a group activity. For more information on groups, please see?About Group Work. This is a ...

...

Submit the second milestone of your final project, a paper that assesses the current condition of th...

Introduction ? ? ? ? ? ?This study is constructed to analyze a sustainable, comprehensive strategy for a company in Manchester through evaluating t...

In your post, consider the various attributes of a transportation management system (TMS), rate shop...

Transport Management system is a platform of logistics that helps in developing a business through the help of planning, executing and providing ?th...

Submit the third milestone of your final project, a paper that provides an overview of the current c...

The regulation of the past and present import and export systems from the United States to the European Union has become more developed and effectiv...

In your post, consider the enormity of eliminating waste throughout a supply chain and in the tran...

...

In your post, consider how globalization has linked the people, policies, and livelihoods of nations...

Globalization is one of the most practiced and powerful processes in business and marketing, where interactions are done from an international influ...

Submit your final project, a paper that assembles a comprehensive global transportation plan for the...

Intermodal Transportation Selection (Modes of transportation) Transportation is one of the major resources for every business to be successful. Tra...

In your initial post, discuss any service (e.g., Starbucks, McDonalds, Amazon) or manufacturing comp...

  One of the companies that is highly utilizing integrated supply chain management is Amazon. The major benefit of using integrated supply chain...

Identify a company in your region. Research the company's supply chain and operations planning p...

Amazons Strategic Aim and Mission Amazon is one of the topmost multinational companies in America that is leading throughout the world. The compan...

In your initial post, choose one manufacturing company (e.g., Boeing, Nike, and Ford) and one large ...

The two most popular and renowned companies that I have selected are Nike and Amazon. Both the companies have expanded its business process in a wid...

Develop a paper that explain the benefits of benchmarking. What are some of the best-in-class benchm...

Benchmarking is one of the most common and relevant business processes to make the production process better and improve its growth. Benchmarking he...

Submit a paper identifying the organization you selected for your final project and explaining why y...

The organization that I have selected for the final paper is Amazon. I have selected this company because personally I have a great experience with ...

In your initial post, suppose that you are a CCO (Chief Customer Officer) of an organization. Discus...

Chief Customer officer has been developed as a new position since the rise of the importance of customer centric culture in every business organizat...

In your initial post, suppose that you are the logistics manager for a Fortune 500 company. You have...

Logistics costs are the cost that is incurred during the flow of products from sourcing to the final destination. There are many aspects of logistics ...

Quite often, the terms cross docking and break bulk are used interchangeably. However, they actually...

...

Choose a service (e.g., the DMV, a fast-food eatery, a bank) and write a short paper (one page) desc...

Kentucky Fried Chicken is commonly known as KFC is one of the largest fast-food eateries established by Harland Sanders in North Corbin, Kentucky in...

Inventory is expensive. Consequently, companies are looking for ways to reduce inventory yet maintai...

Inventory is one of the most important and beneficial components of supply chain management. Without inventories, a supply chain process becomes inc...

Read the attached Defense Logistics Agency case study PDF. Then, write an assessment of what yo...

The Defense Logistics Agency is one of the most famous logistic services that provide support on a regular basis and also during the time of emergen...

Submit your final project. It should be a complete, polished artifact containing all of the critical...

Selection of an Organization The organization that I have selected for the final paper is Amazon. I have selected this company because personally I...

Find a company that you wish to use as the focus of your deliverables for this course. This can be a...

One of the companies that I want to further research in this course is Procter and Gamble. I have taken this company because the strategy used by this...

Have you taken a class in project management? Have you managed any major projects from start to fini...

Have you taken a class in project management? Have you managed any major projects from start to finish? If so, please describe your management techn...

Why does a firm need inventory? Why is excessive inventory bad? What can a company do to reduce its ...

Address variations in manufacturing requirements by changing the capacity planning in accordance with purchases, projections, orders, and inventory ...

A decision tree is a schematic representation of the alternatives available to a decision maker and ...

Critical Thinking Assignment of Module 05 MGT530 Nawaf AlotibiSoutheastern University MGT530: Operation Management Professor Kyle SteadhamJanua...

According to Stevenson (2021), processes converting inputs into outputs are at the core of operation...

Identify what a business process is and mention its benefits and disadvantages. A business process is a series of activities or tasks designed to prod...

Please view, read, and comprehend the Goods vs. Services Continuum [PDF] and then use it t...

Hello professor and class Two companies I am familiar with are Johnson & Johnson, & Walmart.         ...

Please respond to the following: Examine the role of Customer Relationship Management (CRM) in bu...

Hello, professor Dr. Guevarez and class, Customer relationship management (CRM) is a method for managing the companies' relationships and also in...

Please respond to the following: Facility Design must be integrated into and support both Job and...

Hello, professor Dr. Guevarez and class, Customer relationship management (CRM) is a method for managing the companies' relationships and also in...

Review “Bank USA: Forecasting Help Desk Demand by Day” from the end of Chapter 9 in the ...

The challenges faced by the Help Desk at Bank USA may include the following: High call volume: The Help Desk may receive a large number of calls da...

Please respond to the following: Select a service process and describe the flow using no more tha...

I will describe a process flow for the online shopping process: Source: ("Flow Chart Diagram," n.d.) Log in to the online store or webs...

Please respond to the following: Select a goods-producing organization and a service-providing or...

Considering a furniture manufacturing company as a goods-producing organization and a restaurant as a service-providing organization. Aggregate plann...

 Please respond to the following: Analyze the importance of production planning and scheduli...

Hello professor and class, Production planning and scheduling are essential components of any organization. It helps develop a feasible plan to manag...

Please respond to the following: Select two fast food restaurants and evaluate them in terms of s...

For this discussion, I would select Burger King and KFC to evaluate the service quality. Burger King and KFC both have above-average service quality....

Please respond to the following: Compare and contrast the lean service system found within Southw...

The lean service system in Southwest Airlines involves the following system to work efficiently and cost-effectively: Single-class cabin. No assig...

Every course you take is an investment in the “Business of You.” Take a moment to reflec...

In BUS 430: Operations Management, I have learned the fundamentals of operations management and how to apply them in the business world effectively. T...

Review the Research Paper & Presentation Overview and finalize your research paper. Do...

8.3 - Research Paper Kiara Allen Embry-Riddle Aeronautical University WW-LGMT 420: Management of Production Operation Professor John DenigrisJun...

As part of the short-term scheduling process, a manager must assign tasks and resources (usually mac...

...

Respond to the following in a minimum of 175 words: Choose 3 products you might be interested in ...

Three products I wish to purchase online:? ?1) Xbox Series X Websites visited (order of the listing is based on the browsing/shopping experience):...

Research the definitions of various production and operations management terms in the textbook readi...

While reading the textbook, I came across a term called "Lean Production ( Heizer et al., 2016)."Lean Production is a systematic approach to...

Describe the differences between productivity and its subcomponents (total measure productivity, par...

Productivity is a crucial concept in production and operations management that measures resource utilization efficiency in generating goods or service...

What are two reasons project management is not well done in corporations? Why? What are some specifi...

Project management is not well done in corporations due to several reasons. I believe a lack of understanding of the significance of project mana...

Discuss an example of a work-related project that is able to be broken down into structure, tasks, s...

The Example that comes into my mind of a work-related project is launching a new website. They are broken down into a structure, tasks, and subtasks. ...

Entrepreneurial Strengths and Actions to Increase Value Creation Complete the table below, asse...

...

Read the assigned textbook chapter(s) of Module 5.    2. Write your reaction t...

Part I: Chapter Summary The chapter presented examines leadership and its different facets. It highlights the importance of leaders in directing gr...

First, read Chapter 10's Critical Thinking Case - "Diverse Teams Hold Court " (MO...

Diverse Teams Hold Court Case Study Malik PierreLouisWilliam Paterson University 202325-MGT3060-800 Professor Ashley Lee August 10th, 2023 Di...

Discuss the four types of process strategies and give an example of each. Also, please share any per...

Process strategies are techniques used in operation management to design, manage, and improve business processes. There are four types of process...

Discuss the differences between utilization and efficiency as measures of system performance. Whi...

Utilization refers to the proportion of time that a resource or system is active or in use. It measures how much of the available capacity is used to ...

Write a 2- to 3-page memo to the CEO of the company you’ve been assessing throughout the cours...

Memorandum Daniel Kardan University of Phoenix MGT/576: Opportunity Evaluation and Value Creation Professor Bruce Betts August 21st, 2023 Me...

Discuss the key factors that impact location decisions. For example, if locating a facility in India...

The location decision is a crucial aspect of business strategy that involves selecting the optimal geographical location for a business's operatio...

An ideal paper length is 8 to 10 pages (12pts, Times New Roman, Double Spaced), excluding the cover ...

Exploring Organizational Behavior in the movie The Devil Wears Prada Malik PierreLouisWilliam Paterson University 202325-MGT3060-800 Professor ...

Given all that has been covered in the class, what is the top supply chain issue for the future? Con...

Integration of Blockchain Technology into Supply Chain to Enhance Transparency and Human Rights Management Jeremy Rhoades American Public Universi...

Discuss several advantages of linear programming; clearly explain the reasons for your choic...

There are several advantages of linear programming.  Linear programming excels at optimizing resource allocation. Whether minimizing c...

Discuss several disadvantages of linear programming; clearly explain the reasons for your choices...

As there are advantages of linear programming, there are also drawbacks. Some of them include: Limited Applicability, where linear programming is eff...

One evening when she came to work to start the night shift, Lilly Ledbetter found an anonymous note ...

1) Considering the Ledbetter case with Goodyear, some of the possible intervention manager indulge in order to streamline the performance of managem...

During the past four weeks, we have discussed the acquisition T&E system. We are using chapter 1...

Acquisition and Logistics T&E are critical components of the defense procurement process that ensure military systems and equipment satisfy thei...

Both service and manufacturing organizations are required to evaluate capacity. Explain at least thr...

The three major considerations for a hospital are Bed capacity, Health care staffing levels, and Equipment and technology. In terms of hospital perspe...

From your experiences, compare your favorite brick-and-mortar department store to a comparable onlin...

From my experience, When I look at brick-and-mortar department stores, the advantage I can find is that I can physically interact with the products. I...

Identify a process within your organization that requires improvement. Explain how using the DMAIC m...

I will consider an organization where one of my friends was working. She was working in a customer support process. She told me that improvements in t...

Transportation is required to move both work in process and finished goods. Discuss the consideratio...

Transportation is essential for work in process and finished goods. Factors such as speed, cost efficiency, the impact of the environment, demand, and...

LO-6  Describe how to identify, measure, and monitor program outcomes. Yes, one of the differe...

In terms of program evaluation, outcome plays a vital role in accordance with the intricacies of measurement that assesses the credibility of outcom...

Describe the different forecasting methods and provide an example of when each is most applicable...

There are different forecasting Methods. Forecasting methods are classified into two types: Quantitative and qualitative. In quantitative methods, the...

Imagine you work for a breakfast cereal company that makes prepared products that are served cold. Y...

Time series forecasting is a quantitative technique that a new hot breakfast cereal would require by the consumer. According to the definition, t...

Did your company provide an orientation for you as an intern? If so, how could they improve i...

1.  I am an intern so a comprehensive orientation would be beneficial. An ideal orientation should cover the company's culture, key personne...

Which of the following is NOT true about the cost of quality? ...

Increasing prevention cost increases appraisal, internal, and external failure costs. ...

The work of 20 claims processors is sampled and examined for errors. 100 claims are randomly pulled ...

0.099 (or 0.10). ...

Costs of inspectors, testing, testing equipment, and labs are examples of ...

appraisal costs. ...

A production center is available for 8 hours per day in a factory. It is composed of several rotary ...

is 75%. ...

The concept of mistake-proofing was first developed in the 1960s by Shigeo Shingo. It was called ...

poka-yoke. ...

Which of the following statements concerning ISO 9000 is FALSE? ...

An ISO 9000 registered company signifies the company produces products of the highest quality. ...

Quality of design ...

is determined before production by a cross-functional product design team. ...

A product assembled of 10 purchased components, where the defective rate of each component is 0.5%, ...

95.11%. ...

Which of the following is the most important criterion (highest number of points) of the Malcolm Bal...

Results ...

Poka-yoke is ...

designing a process so that it can only be performed correctly. ...

Mean time between failure ...

is used to measure a product's reliability. ...

A supplier that guarantees 100% conforming parts to customers even though production yield at its pl...

False ...

ISO 9000 standards guarantee that a product or service has no defects. ...

False ...

SERVQUAL measures which dimension of service quality? ...

Responsiveness, tangibles, empathy, assurance, and reliability. ...

While monitoring a production process that is in a state of statistical control, a control chart tha...

classify a process as "in control" more frequently. ...

Suppose that a process is in a state of control and we have the following information for a human we...

207.7 lbs ...

Which of the following statements about six sigma is NOT correct? ...

The six sigma approach is suited only for manufacturing processes. ...

Range charts are used to evaluate ...

the variability of data within samples for variable data. ...

Which of the following techniques are used for continuous improvement? ...

All of these choices ...

Which of the following statements about process capability is accurate? ...

  All of these choices are true. ...

The appearance of a restaurant meal that is not satisfactory is an example of ...

  attribute measurement. ...

A cause-and-effect diagram ...

  has all of these features. ...

Which of the following statements about process quality control is NOT true? ...

Common cause variation can be eliminated from the process by removing the potential causes. ...

Generally, two types of data may be collected from sampling at an inspection point. These two types...

variable and attribute data. ...

Suppose that you have taken 30 samples of 200 units each and calculated the proportion defective as ...

.1309 ...

A manufacturer of television wall mounts would like to make a chart to monitor the percentage of def...

  0.102. ...

A machining process is capable of producing a component with an average specification of 5 inches an...

0.667. ...

The ability of the process to meet, or exceed, its specifications can be determined by ...

Cp index. ...

A Pareto diagram ...

shows the prevalence of the various types of defects that have been found. ...

The two fundamental supply chain strategies are ...

innovative or imitative. ...

Next year's goal is to fill 99% of all orders from stock. This is an example of which of the fol...

  Objective ...

In the product imitator strategy, the order winner is ________ for the customer, whereas in the prod...

price, flexibility ...

A company uses proprietary computer software to offer services that other companies have not been ab...

  Distinctive competence ...

Make or buy is an example of what type of strategic decision? ...

Process ...

The operation objectives of quality, cost, delivery, and flexibility are ...

  connected. ...

The four common objectives of operations are ...

  quality, cost, delivery, and flexibility. ...

Operations strategy is a ...

functional strategy. ...

Which of the following is NOT a characteristic of a global corporation? ...

Facilities and plants are located on a country-by-country basis. ...

The four elements that form the heart of operations strategy include ...

mission, distinctive competence, objectives, and strategic decisions. ...

Which of the following statements concerning the relationship among corporate, business, and functio...

  Corporate strategies guide the development of business strategies, which guide the development of ...

Supply chain strategy focuses, in part, on ...

all of these choices. ...

Which of the following statements concerning quality function deployment (QFD) is FALSE? ...

QFD is a tool used to monitor the sampled output of high-volume operations continuously to ensure products continually meet technical design specifica...

Quality function deployment ...

links customer requirements to technical specifications. ...

Quality function deployment ...

all of these choices. ...

Process design ...

should occur at the same time as product design. ...

The third common phase of product development focuses on pilot production and testing. Which of the ...

Introduction of full-scale production and market introduction. ...

A restaurant offers a "customer's choice" sandwich for which the customer specifies th...

108 ...

When marketing, engineering, and operations simultaneously develop a product, this approach is known...

concurrent engineering. ...

An example of a prototype is ...

the original McDonald's restaurant. ...

What is shown by the "chimney" in the house of quality (QFD matrix)? ...

A ranking of the relative importance of each customer attribute. ...

Product design decisions are strategically important for a variety of reasons. Which of the followin...

Product design decisions typically account for an insignificant percent of a product's postdevelopment production costs. ...

According to the text, which of the following is a prerequisite to mass customization? ...

Modular design ...

What element is shown along the left side of the quality function deployment (QFD) matrix? ...

Customer attributes for the new product. ...

Approximately what percentage of the American workforce works in service industries? ...

80% ...

Which of the following is NOT a new challenge facing operations? ...

  Quality teams ...

Which of the following does NOT come under the process category of the operations decision framework...

Product or service inspection ...

Inventory decisions involve ...

all of these choices. ...

Common inputs to the operations transformation process include all of the following EXCEPT ...

  conversion processes. ...

The five decision areas in operations management are ...

A)  process, quality, capacity, inventory, and supply chain. ...

Key elements/events that should be monitored in the firm's external environment include all of t...

  All of these should be monitored. ...

The supply chain extends from ...

supplier to customer. ...

Capacity decisions ...

include staffing and scheduling. ...

Challenges facing operations and supply chain managers signify that ...

every operation should be externally directed to meet the customers' requirements. ...

Supply chain management includes the integration of ...

  all of these choices. ...

Offshoring refers to ...

  a product or service made or delivered in a foreign country. ...

A U.S. hospital system is considering outsourcing a portion of its diagnostic workload to a medical ...

  $483,000 ...

A company has the following financial information (in millions of $):     &nb...

7.92 ...

When purchasing finds savings in the cost of goods sold, ...

such savings fall directly to the bottom line. ...

A manufacturer has decided to outsource and offshore a small electric motor that it currently manufa...

$212.28 per unit ...

A company has sales of $150 million, cost of goods sold of $100 million, and a before-tax profit of ...

  $62.5 million. ...

Purchasing activities include ...

all of these choices. ...

A company needs to have 25,000 pounds of material trucked from plant A to plant C. It also needs to ...

The consolidated shipment is the low-cost option by $150.00. ...

Smith Equipment has three separate shipments to customers all in the same city. The shipment weights...

consolidate the shipments at a savings of $150. ...

Which of the following was NOT given as one of the five modes of transportation? ...

Internet ...

Which of the following is NOT a significant contributing factor to warehouse location decisions? ...

  All of these choices are significant contributing factors. ...

Which of the following transportation modes has the lowest cost per ton? ...

  Rail. ...

When a distribution center immediately sorts large incoming shipments into smaller lots and into emp...

cross-docking. ...

Suppose a warehouse is to be located to ship to the following three customers (A, B, and C) with dem...

21.5. ...

Smith Equipment has a single shipment of 20 units, each weighing 1,500 lbs., to go from its headquar...

  Rail ...

The major components (patterns) of a time series consist of all of the following EXCEPT ...

correlation. ...

A regression model is an example of which type of forecasting method? ...

Causal ...

The difference between actual demand and the forecast is ...

  forecast error. ...

Using exponential smoothing, if we want forecasts to be very responsive to recent demand, the valu...

large. ...

________ models are usually more accurate than ________ models for medium-to-long-range forecasts. ...

  Causal, time series ...

A small company that manufactures rubber boots is selecting a method to forecast demand for the next...

  Qualitative ...

Given the following weekly demand figures,   Week Demand 1 20 ...

30 ...

The moving average forecasting technique rapidly responds to changes in the mean level of demand whe...

a small number of periods is used. ...

  Given the following weekly demand figures, what is the MAD at the end of week 5?   ...

12.0 ...

Which of the following is NOT a measure of forecast accuracy? ...

Cumulative absolute deviation of forecast error ...

What is the exponentially smoothed forecast for week 2? (Use F1 = 25 and alpha = 0.2.) ...

  24 ...

The forecast was 70 units for the current period while actual demand was 76. The forecast for the ne...

  0.967 ...

Which phrase most closely describes the Delphi forecasting technique? ...

Rounds of anonymous data collection ...

The average cash-to-cash cycle is defined as ...

Days in inventory + days in account receivable - days in accounts payable. ...

Which of the following is NOT true about supply chain dynamics? ...

The best way to improve the supply chain is to increase the total replenishment time and to feed back actual demand information to all levels. ...

Which of the following does the supply chain operations reference (SCOR) model NOT include? ...

All of these choices are included. ...

To reduce supply chain risk, a company should ...

buy the same critical item from two or more suppliers. ...

The "triple bottom line" of supply chain performance refers to ...

A)  environmental, social, and financial performance. ...

Backward or upstream supply chain flows include ...

all of these choices. ...

Which of the following is included in the supply chain risk mitigation framework? ...

Postdisruption recovery ...

The level of supply chain resilience is determined by the ability to ...

plan, detect, and act on disruptions. ...

Supply chain sustainability is accomplished primarily through ...

  all of these choices. ...

A service guarantee ...

all of these choices. ...

Which of the following is a common potential benefit of outsourcing services? ...

  Increased ability to focus on core competencies. ...

Service recovery refers to ...

the ability to quickly restore service following a service failure and provide compensation. ...

The ideal lot size for a lean system is ...

  one. ...

The basic foundation of the Toyota production system and just-in-time manufacturing includes all o...

  longer product development times. ...

________ is(are) the direct observation of work, conducted so that work practices can be improved. ...

  Gemba ...

The ideal setup time for a lean system is ...

0 minutes. ...

Lean thinking can be applied to ...

all of these choices. ...

A monthly production schedule calls for 20,000 units of product A, 10,000 units of product B, and 5,...

1,000 units of A; 500 B; 250 C. ...

The seven forms of waste include all of the following EXCEPT ...

bottleneck. ...

Which of the following is NOT generally an element of a lean system? ...

  MRP push system ...

Which of the following is true for takt time in a lean system? ...

Takt time is used to match supply and demand. ...

One of the main objectives of a lean system is ...

reduction of waste. ...

Reducing setup time is important because it ...

all of these choices. ...

The effect of a lean system on employees can best be described as ...

  lean engages employees in problem-solving activities. ...

Process elements that might be changed when improving a process include ...

all of these choices. ...

A bottleneck is ...

  all of these choices. ...

A service blueprint ...

  has all of these features. ...

The capacity of a process is determined by   ...

the bottleneck. ...

A bank has an average of 10 customers per hour arriving into the system, and it takes an average of ...

  5 customers ...

What does a square or rectangle symbol indicate in a flowchart? ...

  Operation ...

A machine center can produce 175 units per day at 100% utilization. Demand is 75 units per day, and ...

  125 units. ...

If I denotes the average inventory in the system, T denotes the average throughput time, and R den...

  R = I/T. ...

If a factory has 100,000 units of materials in the system and if the average flow rate of the system...

  20 days. ...

Assembly lines have a number of characteristics. Which of the following is typically NOT a charact...

Use of general-purpose equipment. ...

Process efficiency is usually highest in which type of process? ...

Assembly line ...

An important lesson from the product-process matrix is ...

give importance to aligning product choice decisions and process choice decisions. ...

The type of processing system that is used for highly standardized products such as oil and gasoline...

  continuous process. ...

Which of the following is among the factors that influence process selection? ...

  All of these choices ...

A company makes necklaces with attached letters. Department A manufactures the necklace chains and l...

make-to-stock, assemble-to-order. ...

The type of processing system that is used for complex jobs with a unique or creative set of activit...

project. ...

Mass customization is defined as ...

producing a large variety of products at approximately the same cost as mass production. ...

The throughput ratio (TR) is the ratio of the total processing time for the job divided by ...

total waiting time plus total processing time. ...

Make-to-stock (MTS) and make-to-order (MTO) choices each offer relative advantages and disadvantag...

MTO typically allows for higher flexibility in product design offerings. ...

Primary reasons to hold inventory include all of the following EXCEPT ...

to decrease inventory turnover ratio. ...

A paint supplier that places orders for different colors of paint for delivery at the same time shou...

P system. ...

Given that unit cost = $25, annual carrying charge = 10%, annual demand = 4,000 units, and orderin...

219 units. ...

A particular brand of soap has a lead time of three weeks to reorder, a weekly standard deviation of...

118.49 units. ...

A computerized inventory system checks inventory levels at the end of the week and produces suggeste...

A periodic review system ...

ABC analysis requires that inventory be classified according to ...

annual dollar usage. ...

Of the cost elements making up total inventory cost, which is the most difficult to estimate? ...

Stockout costs ...

Which cost is NOT part of inventory ordering costs? ...

Obsolescence costs ...

In the basic EOQ model, if annual demand and carrying costs double, the EOQ ...

  remains the same. ...

Traditional ABC classification means that inventory ...

is classified according to demand times cost (demand * cost). ...

Demand for an item is 10 units per week, and delivery lead time is 3 weeks. The safety stock is know...

41 ...

Service levels are ...

all of these choices. ...

In MRP "scheduled receipts" are ...

open orders not delivered yet. ...

Using a lot-for-lot ordering strategy for the following item, what is the net requirements amount in...

5 units ...

________ systems use a requirements order philosophy, while ________ systems use a replenishment ord...

MRP, order-point ...

The parts explosion results in the following outputs:   ...

purchase orders and shop orders. ...

Using a lot-for-lot ordering strategy for the following item, what is the planned order release amou...

15 units ...

The master production schedule (MPS) for two products, A and B, is shown below. To manufacture item ...

38 units ...

Successful MRP implementation requires   ...

management support, accurate data, and adequate computer support. ...

Integration with which of the following functions is required for an effective ERP system? ...

All of these choices ...

The master production schedule for Product A shows a need for 30 units, and Product B shows a need o...

  190 ...

Decisions made in operations affect other functions as below except - ...

Operations decisions directly affect government’s macro-economic policy ...

The process view provides a basis for viewing an entire business as a system of interconnected proce...

True ...

The three primary functions that exist in most business organizations are ...

operations, finance, and marketing. ...

The primary role of operations and supply chain management is to ...

increase the productivity of the firm. ...

The transformation view of the operations function provides a unified approach for ...

True ...

Simultaneous Engineering or Concurrent Engineering refers to all below ...

All of the above ...

Which of the following is NOT true regarding service and manufacturing operations? ...

both employ roughly 50% of the US workforce ...

Marketing function has a great deal of interface with the operations function except ...

Marketing’s product branding advertising is directly related to operation’s inventory decisions ...

Finance and Accounting function has a great deal of interface with the operations function except ...

Finance can directly determine initial public offering (IPO) decisions based on operations considerations ...

Cross-functional teams in product and process development/design requires all except ...

Research and Development teams are separated from all other functions ...

Why is operations management a more encompassing term than production management? ...

Operations management refers to service as well as manufacturing organizations. ...

3.3 Written Assignment: Regulatory Requirements - Quality Assurance (QA) and Quality Control (QC) &...

Introduction   Quality Assurance (QA) and Quality Control (QC) are both essential parts of repair, Repair, and Overhaul (MRO) organizations that...

Your Experiences with Operations Strategy   First, think about&...

Experiences with Operation Strategy As an African American employee in a successful business organization, I have seen how important it is to impleme...

Review the Research PaRer & Presentation Overview and fi...

Abstract The research paper has aimed to find whether optimizing aircraft maintenance operations at Delta Air Lines leads to improved efficiency and ...

 You will summarize your interview, responses, analysis, and recommendations in a PowerPoint pr...

Speaker Notes (needs to be sent to the client - the last person adding to this will ensure unnecessary tutor names or other data are removed.) PASTE...

Based on your readings and resource review, you should be able to define the three strategic approac...

Introduction Competitive advantage is any aspect that gives an edge to a company over its competitors in the industry. Competitive advantage is attai...

Identify an online sales company and explain how the concepts of complexity and divergence apply. Pr...

Let's consider the online sales company Amazon as an example and examine how the concepts of complexity and divergence apply to its business. ...

Data Analysis and Interpretation ...

Participants' Demographic Statistics The researcher employed purposive sampling, selecting fifty college-age adolescents with various backgrounds...

The physicians at Aubreyville Regional Hospital were growing increasingly frustrated with the lack o...

Question 1 The passion of Dr. Jones for retrieving historical information about patients confirms her intention to gain a holistic understanding of h...

Write an essay on how one could design a Visual Factory and perform Total Productivity Maintenance ...

Introduction Visual factory is a critical component that a production manager uses for developing an efficient and safe production control and mainte...

Read the article that discusses statistical process control for service processes. Discuss how the ...

Multiple control charts is a very important tool in statistical process control. Multiple control charts has to control the product or the process at ...

   Choose a real-world process (at a bank or hospital or university or restaurant or hote...

INTRODUCTION Six Sigma is a tool that is used in all types of industries. The tools for each business are universal. Six Sigma, over the last 25 year...

Perform PEST and SWOT analyses for a potential Six Sigma project at your workplace. Summarize the pr...

Six Sigma refers to a marketing strategy that lays emphasis on the improvement of the profitability and the efficiency of an organization on the whole...

 Read the article that discusses how Six Sigma was applied to improve a hospital discharge proc...

Hospital discharge process: This is the time when patients are discharged from the hospitals. Either they are to be taken back home or to an after car...

Read the article that explains the types of benchmarking. Write a short paper on how any o...

Benchmarking Benchmarking is the comparison of technological standards with the best in the industry. This method of comparison involves assessing ex...

Read the article that discusses the Measure phase and the commonly used tools and concepts within t...

Measure appears to be second in position in case of a teams work. In case of measure quantity holds an important position rather than quality.The aim ...

Identify the customers of a process at your workplace. Then, identify their requirements from that p...

PROJECT MANAGEMENT OF A COMPANY THAT INSTALLS MACHINES FOR CANCER TREATMENT In today’s world, the requirements of the customers are rapidly ch...

Read the article that discusses the stages of team development. Discuss the forming, norming, stormi...

Working on a new line production with a newly carved team of members, we had undergone the steps of forming, storming, norming and performing to carry...

Magnet hospitals are required to integrate evidence-based practice. What are steps and strategies th...

Evidence based practice is an integrative mode of addressing healthcare questions and problems with best available evidences and expertise coupled wit...

Read the article that discusses how to create a happy workforce using Total Performance Sc...

Similarities between Balanced Scorecard and Total Performance Scorecard ? Both Balanced Scorecard and Total performance scorecard are the system of me...

  Create a brochure with two sections delineating the advantages of SIOP(Sheltered Instruction...

The Sheltered Instruction Observation Protocol (SIOP) is a model that has helped in addressing the academic needs of people interested in learning Eng...

Armand Feigenbaum made significant contributions to quality management. Research on Feigenbauma'...

Armand V. Feigenbaum and the term Quality Control go hand in hand. He is an American Quality Expert and a businessman. He was instrumental in devising...

  Read the article that discusses how to use Deming’s principles to create th...

William Edward Deming was not only a statistician but also a professor, author, lecturer and consultant. His amazing principles to create leaders were...

Read the article that illustrates how process mapping can be applied to a sales process, w...

Use of Lean solution Lean solutions are used to eliminate the waste in any process whether in form of step or time. Lean solutions main aim is to impr...

Read the article that illustrates the 5S methodology with examples. Also, watch this ...

Implementation of 5S 5S helps in improving the work environment of your work place thus leading to better productivity. Here we are taking the exampl...

Read this article about Lean Six Sigma for the twenty-first century. Review the “...

Assignment: Changes Needed in Six Sigma Organizations usually view Six Sigma as a concept formulating ways to achieve perfection or near perfection. O...

Blog: Reflective Summary   You have been investigating and reflecting upon Six Sigma quality ...

The Six Sigma quality management issues have multiple issues associated with it. The quality management area in a business organization is critical fo...

  Read this article about Lean Six Sigma for the twenty-first century. Review the “What ...

Discussion Title: Changes Needed in Six Sigma The business environment has evolved through changes and it is bound to embrace changes in the future to...

Read the case study about using the DMADV approach for designing new housing at the University of Mi...

Introduction The DMADV approach is an effective tool to create and develop new product, services or modify existing products to make them meet client...

Share examples of each of the Level I, II, and III coping strategies that you have experienced in yo...

Coping Strategies Today the main problem for a person is how to cope up with this fast running life which on failure creates stress in our mind leadi...

Investigate on the internet the various ways (interviews, focus groups, surveys, etc.) to collect th...

Interviews, Observations, Questionnaires, focus group are used for collecting the voice of the customers. A large amount of information can be collect...

Read the article that presents the application of Six Sigma in research and development firms. Summa...

Practicing Six Sigma Quality Management Six Sigma approach is a set of tools and strategies to improve the on- going process. Organizations have star...

Investigate on the internet the method of kaizen (Japanese for “continuous improvement&rdquo...

Japanese  for "improvement", or "change for the better" refers to philosophy or practices that focus upon con...

Discussion Title: Continuous Improvement   Read this case study about the continuous improv...

Continuous improvement is defined as “an organization wide process of focused and sustained incremental innovation” (Coughlan & Co...

Discussion Title: Comparison of Six Sigma Course Project with CSX’s Project Read this article ...

The cause and effect diagram provides an effective tool for planning solutions for a problem. It is more effective as planning tool as compared to pro...

Blog: Practicing Six Sigma Quality Management Read this case study about CSX’s DMAIC approach ...

CSX Corporation managed to save millions of dollars by using define, measure, analyze, improve and control (DMAIC) approach of Six Sigma through reduc...

Discussion Title: Relationship among the Performance Metrics (a) What is the need for the process ca...

Introduction Process capability in Six Sigma measures the percentage or degree of extent to which the production systems of the firm is able to meet ...

Read the article about combining Six Sigma and knowledge management in hospitals. The authors hypoth...

Introduction Six Sigma approach focuses on “process improvement and variation reduction”. (Isixsigma.com) while knowledge management syst...

Watch the video "Overview of Six Sigma" located in the Module Six Resource folder....

Common causes of variation in manufacturing process In the manufacturing process of a firm, the common causes of variation refer to those fluctuations...

Post 5.1 Recall “management reserve” from the Module Five lecture document. A management...

Management reserve Management reserve refers to any unforeseen, unpredictable or unanticipated work, circumstances and events encountered by a project...

Write a report of 200–400 words about the repeatability and reproducibility of the measurement...

Introduction In a Six Sigma project undertaken to reduce quality errors in the painting process of a company that produces metal parts for A/C system...

Read this article that explains the importance of repeatability and reproducibility of a measurement...

A service process needs efforts directed towards the customers demands. In return to the fulfillment of these demands, the service generates not only ...

Review this example to learn how individual effectiveness of each inspector is calculated, besides r...

The problems associated with the measurement errors in any measurement system remains a critical problem area. Inspectors have different human judgmen...

Read this case study about a consulting company that improved customer satisfaction by employing R&a...

Variations are common in any operations, be it the data collection process or any important operation. But the vital discussion area remains to remove...

Read this case study that discusses how quality is achieved at an Iowa Hospital via the PDSA ap...

Introduction The PDSA model which stands for Plan-Do-Study-Act was developed by Dr. W. Edwards Deming as an improvement of the PDCA improvement model ...

Discussion Title: Improvement of a Hospital’s Discharge Process Read this article t...

Introduction Six Sigma DMAIC approach provides a framework for improving customer satisfaction and reducing hassles and time involved for patient dis...

Read this article that compares traditional and Six Sigma quality approaches with respect to ...

Introduction The claim of that traditional approaches to quality improvement can be “overly idealistic or not sustainable” is not without ...

Read the case study that discusses the costs of poor quality. Identify at least five costs of ...

Five costs of poor quality Cost of quality represents costs that are incurred for failing to adhere to certain minimum quality standards of a product ...

MANAGING QUALITY IN HEALTHCARE INDUSTRY ...

Abstract In the Healthcare Industry, the quality of care provided has now become more than just a concept. In the US, the Institute of Medicine has l...

The research paper would be on an issue related to management of operations such as Comparison betwe...

Managing Quality in Healthcare industry Abstract In the Healthcare Industry, the quality of care to be provided or received has now become more than...

The first three questions refer to the attached article. For these, imagine that David Hammond has h...

The first three questions refer to the attached article. For these, imagine that David Hammond has heard of your skills in management, and has contrac...

You are currently working at a large academic medical center in an urban community. For the last sev...

Large academic medical centers and community not-for-profit hospitals have very different economic and financial structures, which can affect staffing...

First Discussion topic:   Specific IT system applications in health services delivery fall in...

Topic 1  Influence of Clinical Information Systems on Healthcare Delivery Clinical Information Systems (CIS) have a major positive impact on pa...

Increasingly, technological change is raising serious ethical and moral issues: gene mapping of huma...

Human gene mapping, a cutting-edge technique that pinpoints individual genes and their roles, has enormous promise to enhance human health. The gene m...

The concept of value (improved benefits at lower costs) is important to those who finance healthcare...

The idea of value in healthcare, which means getting better results at cheaper prices, is essential to the long-term viability and efficiency of healt...

First Discussion Topic:   This article from Future Technology 500, presents several examples ...

Challenges and Opportunities of Implementing Holograms and Acupuncture Technology   Brain-Computer Interfaces (BCI)   BCIs have the revo...

Explain the salient characteristics of various types of provider organizations, including mission, p...

Working with a downtown Community health center was an honor. During my year-long position, I learned much about the distinctive qualities that make C...

1.    What are the cultural beliefs and values presented in the video?   2...

Cultural beliefs and values  The video emphasizes several cultural values and ideas, most notably the significance of interpersonal connections,...

Using the link Harvard Business Publishing found in your course Table of Contents, read the case stu...

1. Summary of the Scenario and Key Points The Kleiner-Perkins and Genentech case is a prime example of the transformative convergence between scienti...

  As a primary benchmark, benefits must outweigh any negative consequences. Research and evalu...

Clinical trials play a key role in the evolution of medical treatments. These systematic examinations, involving human volunteers, assess the safety, ...

  The Institute for the Future predicted that new vaccines would be developed to treat noninfe...

The Health Insurance Portability and Accountability Act (HIPAA) is a pivotal law designed to safeguard the health and well-being of American citizens....

     Research HIPAA, and explain the following in detail:   What is the date ...

The Health Insurance Portability and Accountability Act (HIPAA) is a pivotal law designed to safeguard the health and well-being of American citizens....

The text discusses forces of future change. Please choose two and offer an analysis of your choices....

Impact of Medical Technology The diagnosis and treatment of patients have greatly improved thanks to medical technology. Advanced imaging techniques,...

Answer the following short-answer questions in detail. See the Final Exam Rubric for more informati...

What are the basic characteristics that differentiate the U.S. health care delivery system from that of other countries? The intricate combination of...

In Module Seven, you will investigate metrics for determining success in an innovative organization ...

I am employed as a financial counselor in a large medical facility. According to me none of Ekvall's 10 aspects surprised me much since taken as a...